error on resmed 11 severe air leak

[forzalazio]

just got my resmed airsense 11 with resmed f20 full face mask, everytime i put mask on and activate machine it says i have severe air leak... mask is snug on my face... can anybody offer any suggestions please

[OpalRose]

I don't use a full face mask, so wait for others to respond.  In the meantime, read through the Mask Primer, especially toward the end.

https://www.apneaboard.com/wiki/index.ph..._Jeffy1958

[PeaceLoveAndPizza]

A few questions...

1. Do you have the hose snugly attached to the machine and the mask?
2. Do you have the water chamber securely in the machine?
3. Is the mask cushion seated firmly against the frame?
4. Did you watch some YouTube videos on mask fitting and setup?

Most mask leaks are from them being the wrong size, wrong headgear, too tight, or too loose. Full-face masks typically need to be held firmly by the headgear such that they are just resting on your face. The silicone will inflate under pressure and seal against your face if done properly. 

F20's are a beastie to get right when just starting out. We all tend to overtighten them to the point of discomfort or pain. 

Feel along the tube to make sure there are no leaks. I have had kitty claws puncture my hose a few times.

[sauerkraut]

forzalazio;
PeaceLoveAndPizza has the right idea ..
I would just add when You remove and reinstall the water chamber
make sure it is straight and level ..
Good Luck  Steve

[eok361]

you'd probably hear a severe leak right near your face. but it sounds like this is your first attempt. make sure everything in the circuit is connected properly. and the water chamber thing is helpful.

i didn't like the f20, but if it was leaking (which it did for me), i would really be hearing it.

[forzalazio]

thank you so much!!!!.. problem solved this am... reseeded the humidifier and works fine now

---

water chamber did the trick...