Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

initial aircurve pacewave setup
#1
initial aircurve pacewave setup
after a sad tale of 3 years i was able to get hold of a pacewave.
the airfit f20 mask should also arrive soon. is it the right decision ?

which initial settings would you recommend ? how to set them up ?
and how to sleep the fist time with such a device ?

would it take an empty vfat sd-card and automatically write files to it ?
are the settings lost if i exchange the sd-card ? so many questions..
Post Reply Post Reply
#2
RE: initial aircurve pacewave setup
no idea about ASV machine setup mate, hopefully someone more knowledgeable notices it.

settings are saved on the machine, the sd card is only for "reporting" data. some people never even use a sd card.

from what i read if it isn't formatted using FAT32 it will be reformatted by the machine.
Post Reply Post Reply
#3
RE: initial aircurve pacewave setup
So this is an ASV?

You'll probably want this to start:

ASV Auto mode

Default settings from there are
EPAP 4-15
PS 3-15

It should be pretty evident relatively fast if you'll need higher EPAP 1) as your base and 2) to treat Obstructive and Hypopnea, while PS will be a range required to be 5 minimum, and will kick in to increase inhale IPAP to combat Centrals.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: initial aircurve pacewave setup
(06-13-2024, 03:20 PM)SarcasticDave94 Wrote: So this is an ASV?

yeah from my limited research it seems it is the name of the ASV machines in Europe.

https://www.resmed.fr/produits/traitemen...-pacewave/
Post Reply Post Reply
#5
RE: initial aircurve pacewave setup
Copy. The default might be decent enough to start, or alternate plan is to start EPAP Min about 5 or 6 depending on their last machine's setup.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: initial aircurve pacewave setup
thanks. guess i will start soft.

due to a delay, my mask could arrive before the heated tubing,
which leaves me with an unheated one.

which humidifier-setting would you recommend with an without heated tubing ?
Post Reply Post Reply
#7
RE: initial aircurve pacewave setup
It depends on your room atmosphere and personal preferences.

I liked manual humidity at least 4, but you'll want to balance humidity with non-heated hose ability to resist rainout, as in condensation in the hose and mask.

Try to have your machine somewhat lower than your mattress level so you can route the hose to travel uphill to your mask. It may need to have a hose holder to get it to stay in place.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#8
RE: initial aircurve pacewave setup
could something happen to my machine,
if there is fluid coming back ?
Post Reply Post Reply
#9
RE: initial aircurve pacewave setup
It shouldn't. The water in the hose will return to the humidifier tub only.

Having seen a Pacewave ASV, it's the same as what I had just with the international Pacewave name.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#10
RE: initial aircurve pacewave setup
I'm in my second week of my trial machine and after a couple of nights of fiddling with the settings I setted for the following, as anything higher felt like too much pressure. The figures may look low to some, but they're plenty high enough to succeed in zapping my centrals, with my overall AHI score now down to less than 0.5 each night.

EPAP 6 to 10.6
PS 3 to 8
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Mod Note] Are There Any Aircurve 11 ST ot ST-A Users? Crimson Nape 0 66 Yesterday, 11:15 AM
Last Post: Crimson Nape
  Resmed Aircurve 10 VAUTO turning itself off and on throughout the night?? 17WRX 4 133 09-29-2024, 06:41 PM
Last Post: 17WRX
  acquired an aircurve vauto 10/self titrating eok361 9 390 09-26-2024, 07:41 AM
Last Post: eok361
  How should I set up my AirCurve 10 Vauto Josephkpc 14 536 09-25-2024, 10:44 AM
Last Post: Phaleronic
  AHI very high after switching from Dreamstation to Aircurve 10 mu50256 16 794 09-23-2024, 03:11 AM
Last Post: mu50256
  [Treatment] somniosus - Therapy Thread [new user looking for initial settings advice] somniosus 1 143 09-22-2024, 03:50 PM
Last Post: G. Szabo
  Aircurve 10 ASV kbjames 5 262 09-21-2024, 09:49 AM
Last Post: kbjames


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.