Apnea Board Forum - CPAP | Sleep Apnea
Airsense 10 System Fault 010 has me out of commission - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Airsense 10 System Fault 010 has me out of commission (/Thread-Airsense-10-System-Fault-010-has-me-out-of-commission)

Pages: 1 2


RE: Airsense 10 System Fault 010 has me out of commission - eok361 - 09-30-2024

maybe there's a dme in your area with a loaner program???

check craigslist. maybe there's a machine with a few hours at a good price you can use temporarily.


RE: Airsense 10 System Fault 010 has me out of commission - gregger - 10-01-2024

(09-30-2024, 04:07 PM)Nightynite Wrote: I replaced my blower motor and accidentally put it in backwards in the blue silicone boot.
It blew at a high speed and I immediately knew what I did. I shut it off, flipped the motor and all was fine. I never saw a code. But it was only on for 20 seconds or so.

THIS !!!

I took the machine apart again and checked out my installation. I found that I, too, had put the motor in backwards. It's an easy mistake to make, I guess!

Anyway, now that the motor is placed correctly, it's working perfectly and I have no "fault message" anymore. 

Incidentally, this is the generic replacement motor/blower that I installed, which cost $92.99 on Amazon:

Amazon.com: VORGENS Motor Blower Motor Pump for CPAP Compatible with Airsense 10 & S9/S10 Serious : Health & Household

Hoping it lasts for a good while. I am still going to make an appointment with a sleep doctor so that I can get a valid prescription for a new machine, and then this 6.5-year old baby will be a back-up or possibly my travel machine. [It would be nice to have a machine all packed up with its own accessories ready to go!) 

Thanks all for the kind advice. Looking forward again to a good night's sleep.  Wink


RE: Airsense 10 System Fault 010 has me out of commission - Phaleronic - 10-01-2024

(10-01-2024, 10:09 AM)gregger Wrote: THIS !!!

I took the machine apart again and checked out my installation. I found that I, too, had put the motor in backwards. It's an easy mistake to make, I guess!

Anyway, now that the motor is placed correctly, it's working perfectly and I have no "fault message" anymore. 

Incidentally, this is the generic replacement motor/blower that I installed, which cost $92.99 on Amazon:

Amazon.com: VORGENS Motor Blower Motor Pump for CPAP Compatible with Airsense 10 & S9/S10 Serious : Health & Household

Hoping it lasts for a good while. I am still going to make an appointment with a sleep doctor so that I can get a valid prescription for a new machine, and then this 6.5-year old baby will be a back-up or possibly my travel machine. [It would be nice to have a machine all packed up with its own accessories ready to go!) 

Thanks all for the kind advice. Looking forward again to a good night's sleep.  Wink

Very nice! Good sleuthing!  I've replaced two motors on resmed machines now (using the same one you did from Amazon)-haven't installed it backwards but I can see how it could be done hahaha


RE: Airsense 10 System Fault 010 has me out of commission - gregger - 10-01-2024

(10-01-2024, 10:43 AM)Phaleronic Wrote: Very nice! Good sleuthing!  I've replaced two motors on resmed machines now (using the same one you did from Amazon)-haven't installed it backwards but I can see how it could be done hahaha

Yes, the housing is symmetrical end-to-end, and the openings or ports on each end bear a family resemblance!  Grin


RE: Airsense 10 System Fault 010 has me out of commission - Nightynite - 10-01-2024

(10-01-2024, 10:09 AM)gregger Wrote: THIS !!!

I took the machine apart again and checked out my installation. I found that I, too, had put the motor in backwards. It's an easy mistake to make, I guess!

Anyway, now that the motor is placed correctly, it's working perfectly and I have no "fault message" anymore. 

Incidentally, this is the generic replacement motor/blower that I installed, which cost $92.99 on Amazon:

Amazon.com: VORGENS Motor Blower Motor Pump for CPAP Compatible with Airsense 10 & S9/S10 Serious : Health & Household

Hoping it lasts for a good while. I am still going to make an appointment with a sleep doctor so that I can get a valid prescription for a new machine, and then this 6.5-year old baby will be a back-up or possibly my travel machine. [It would be nice to have a machine all packed up with its own accessories ready to go!) 

Thanks all for the kind advice. Looking forward again to a good night's sleep.  Wink

Yes it is easy to do. Glad you can sleep now.   Sleep-well