370
edits
Changes
m
<small>Last edited by robysue 7/25/2017 9:40pm</small>
→SD Cards
= SD Cards =
To use SleepyHead to analyze your data you need an SD card in the xPAP and a computer capable of running SleepyHead. While many DMEs include an SD card when they set up an xPAP, some DMEs no longer include an SD card. See the [[Secure Digital (SD) memory card]] wiki for technical specifications, size and how to lock a SD card.
To determine whether your xPAP has an SD card, find the location of the SD slot in the user or clinical manual for your machine. If there is already a card in the slot, your machine is already recording data to the card. If there is no SD card in the slot, you need to purchase a standard SD card and insert it into the slot. Standard SD cards are found in many stores and they usually cost less than $10. A small capacity (1G, 2G, etc) card is sufficient.
<b>Note:</b> Some older xPAPs cannot use the newer, and more common SDHC and SDXC data cards. If your machine requires an SD card that is not an SDHC/SDXC, it will give you an error message when you insert the card. If you need to purchase a basic SD card, you may need to look on-line or at a store that specializes in camera equipment or electronics rather than a store like Walmart or Target.
= Installing SleepyHead =
Donate to Apnea Board
