Airfit P10 nasal pillow+tube > Resmed S11 heated tubing, which adapter?

[NightOwl42]

Hi,

I have these two items and an Resmed S11 unit. What kind of adapter do I need to couple them?

• Resmed A10 nasal pillow and tube
  
• Resmed Climate Line Air 11 heated tube
  

I hate Amazon too, but probably buying it there, can you point me right to the item?

Thanks!

   

   

[Deborah K.]

I'm just bumping this up so someone who knows the answer might see it.

[Crimson Nape]

One of the few CPAP standards is the air hose end size.  This is pertaining to the full size CPAPs and not the travel models.  All hoses have a 22mm hose connection.  This is true for heated, normal, and slimline hoses.  In turn, all masks have a 22mm connector.  Masks, like the full face mask, will have a quick disconnect style bushing.  Basically, any mask that covers both the nose and the mouth is required to have this feature for quick removal.
- Red

[Oikos22girls]

You won't need an adapter. I use these two items and the heated tube connects to the hose on the P10 mask.

[NightOwl42]

Thanks all, when I connect the mask's tube to the heated tube, there is a gap and I have to tape it in place.

[Oikos22girls]

I am not sure why you are having problems with it fitting. I use the same mask and machine and have no problems with it connecting. I am attaching a picture showing you the two items connected. I am also attaching a picture of the end of the mask tube that connects to the ClimateLine tube. I wonder if something is missing from the end of the tube from your mask. Is the tube from the mask too big or too little for the ClimateLine tube? You wouldn't have ended up with a P10 Mask Pack for the AirMini (travel machine) possibly. If so, that might be why you are having issues. If you have a P10 Mask for the AirMini, the tube ending would be smaller. If that is not the case, then something is wrong. 

          

[NightOwl42]

That attachment/adapter was what I needed. And I found one! Thanks, all.    

[charlie*M]

Thanks for following up, but could you post a part number so future readers can find one as well?

[NightOwl42]

Good suggestion, but I'm unsure of that. The adapter came with an old tube.