Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

OSCAR profiles for different machines?
#1
OSCAR profiles for different machines?
I'm a 6+ year CPAP user with pretty severe complex apnea. I have a Respironics P560 at the factory for recalibration and am struggling with a rental ResMed AirSense 10 AutoSet. I had switched from Sleepyhead 0.98 to OSCAR in Windows 8.1. I seem to have blown away my OSCAR Respironics profile, but have the SD cards and old SH installation intact. I've made lots of mistakes with the ResMed so my first few days of data are pretty useless. I'd like to be able to refer back to the Respironics data, and build new/future data well on the ResMed. Can I do this with 2 profiles on OSCAR (1 for each machine)? I will be moving to a new BiPAP in December, and believe I will want to have a new profile going forward, keeping the previous for reference. Am I thinking about this right - separate profiles for different machines from different manufacturers and algorithms? Thanks for any suggestions!
Post Reply Post Reply
#2
RE: OSCAR profiles for different machines?
G'day BruQu. Welcome to Apnea Board.

Although it's not strictly necessary is is highly advisable to have each machine in its own profile. This is especially true if you are mixing different makes as their data structures are quite different.

You still have the SleepyHead data in place, so the easiest way to proceed might be to delete Oscar including all the data files. Then install Oscar again - it should ask if you want to migrate your previous SH data. Do this. Then create a new profile for the Resmed machine, and a third when you go onto the bilevel.
Post Reply Post Reply
#3
RE: OSCAR profiles for different machines?
Thanks, DeepBreathing!  Knowing how beats "trial and error" most of the time! I did the "guest" thing on apneaboard in occasional visits over a long time, but sent money several times to Jedi Mark in appreciation for SleepyHead - now I can send it here. We have a common interest in having good info ... it's called our lives! I very much appreciate having access to such an attentive and enormous bank of knowledge, insight and experience.
Post Reply Post Reply
#4
RE: OSCAR profiles for different machines?
Welcome to Apnea Board, BruQu!
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#5
RE: OSCAR profiles for different machines?
Welcome to AB.

I have over 20 profiles that I look over for one reason or another, mostly for testing of OSCAR.  OSCAR handles multiple profiles easily.  

If you see something that is not right with OSCAR let us know.  The OSCAR team here is dedicated to making sure OSCAR is both helpful and accurate.  Many of the issues we have resolved were identified by users outside the OSCAR team.
Post Reply Post Reply
#6
RE: OSCAR profiles for different machines?
BruQu, I just looked again at your original post and see that you have severe complex apnea. In many cases complex apnea requires a different type of machine from an ordinary bilevel. Specifically it requires a "bilevel with backup" or adaptive servo-ventilator (ASV). If you haven't already done so, you might want to raise these options with your doc before committing to a new machine. We've seen too many people with complex apnea go through endless procedures - none of which work well and consistently - then wind up with an ASV. (Which does work well and reliably).
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  what kind of Lowenstein machines are supported by OSCAR? acerlogic 7 2,054 11-07-2024, 01:01 PM
Last Post: SuperSleeper
  NOTICE: ResScan 7.1 Software now available [for ResMed machines only] SuperSleeper 8 5,166 10-18-2024, 01:45 PM
Last Post: SuperSleeper
Information Resvent iMatrix Software & Firmware Update for iBreeze machines SuperSleeper 5 2,643 09-23-2024, 07:48 AM
Last Post: MedvedD
  Locking OSCAR profiles WisNaeMe 0 196 05-20-2024, 01:37 AM
Last Post: WisNaeMe
  Oscar with multiple machines pixpop 16 1,257 04-30-2024, 03:43 PM
Last Post: PapaBear562
  Inputting Data from Different CPAP Machines PapaBear562 10 850 04-29-2024, 07:46 PM
Last Post: chronic
  OSCAR lost my profiles! jtardo 13 914 03-25-2024, 07:40 PM
Last Post: jtardo


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.