Autosense 10 behaving strangely

[ChadBSr]

Tidal volume, minute vent, respiratory rate, flow are all far too low. Something is very wrong. Normal flow would be around 20 and you are less than 8.  Your mask pressure is 5 even with pressure set at 8.

You have a leak, probably a mouth leak, or the machine is defective. You need to do a pressure test with a cheap monometer or water

[ChadBSr]

Also check all of your connections, check your filter, etc

[billmelk]

ChadBSr,

I have the EPR turned on with pressure relief of 3 so 5 can make sense.

The thing about a mouth leak is the exact same thing happens when I use my F40 full face mask.

The thing that bothers me most is the data is just plain missing.

Trying to get a new Autosense 11 from my DME and insurance.  But they are doing what they do best, deny! deny! deny!

Cheers,

Bill

[ChadBSr]

Mouth leaks are common with full face masks.

We should be seeing your mask pressure go up, not sit at straight 5 cm