Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Brand New Need help please
#11
RE: Brand New Need help please
.bere are the charts. I'm not sure how to send the whole chart-will read your instructions again but sending last night is 3 so you can see more, especially respirations. thwnke



   
   
   
Post Reply Post Reply
#12
RE: Brand New Need help please
]crimson nape..here's couple more from last night, same chart

   
[attachment=67534]
[attachment=67542

One more!



attachment=67547]

Thanks One more!



attachment=67547]


Attached Files Thumbnail(s)
           
Post Reply Post Reply
#13
RE: Brand New Need help please
   


Reread and ollowed instructions...sending revised chart. Hopefully I got it right
Post Reply Post Reply
#14
RE: Brand New Need help please
Try setting your Trigger setting to High.
- Red
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#15
RE: Brand New Need help please
Let me give a quick reply on the mask issue.

You are doing quite well with leaks at whatever mask you were using in your most recent chart. Good job!

If you were using the F40, adjust the setting on the unit to pillows. I have no idea why, but that’s the setting Resmed specifies on the packaging of the F40.

Also, it might help to consider the position you are sleeping in. See the string of OSA’s in your chart? Could your neck be kinking? A kinked neck could happen if you are using a high pillow, sleep with your head towards your chest while on your side, etc. if you visualize, a kinked neck will cause an obstruction. For some folks, this can also happen if they sleep on their backs, because the jaw slacks and the tongue flops back. This causes OSA’s. The unit might attempt to address this by escalating the pressure, but there’s no pressure that can respond to positional apneas. The only “treatment” is to find a different position, where your neck isn’t kinked and/or your jaw isn’t dropped. This takes trial and error. But fixing it can keep the unit from zooming upward to try and address an OSA that it can’t actually resolve, which in turn can mess with your sleep with arousals.
Post Reply Post Reply
#16
RE: Brand New Need help please
Hello Starwalker, you are having many CA and OA events in that last chart, your min EPAP pressure at 5cm seems too low to me, I would raise it to 7cm and see how it goes for a few nights.
Post Reply Post Reply
#17
RE: Brand New Need help please
Here is last night's chart. Doesn't look great (to me) even though AHI is low but I'll leave it to more knowledgeable experienced minds.

Thanks for everyone's input yesterday, I made the setting changes as suggested. 

Half-Asleep-you are right on that I use high pillows. I actually use 3! because my neck is very arthritic and painful unless supported in a certain position. 

Unfortunately, I had the same problem with the F40 causing facial dents, swelling and my face generally looks all messed up. Very upsetting. Reason is that I still have to pull it tight to stop leaks aa all the other masks. I have very sensitive skin and it just dents/marks easily. I had great hopes this mask would be different, but no. Yes it's softer and all silicone so hard plastic isn't sticking in my face but pulling it tight produces the same results from the straps and frame.  Maybe it's just my face and I can't wear face masks but I can't do the nasal thing as I am a mouth breather.

I don't like walking around with my face like this so will probably stop the therapy again altogether. I have now tried just about every mask. A shame because I actually am breathing better in the morning after using it for 3 days. If anyone has any idea how to solve this problem I would be most grateful.

Thank you!




   
Post Reply Post Reply
#18
RE: Brand New Need help please
Would sleeping on a wedge pillow help with obstructives?
Post Reply Post Reply
#19
RE: Brand New Need help please
You are in a tough situation with your arthritic neck.  Using a wedge pillow (standard size pillow) would probably cause your chin to tuck into your chest even more and make your obstructive apnea worse.  You can try one though if you like.  The incline angle of a wedge pillow may be less the incline of you current 3 stacked pillows set up.   

Currently I sleep on a full body wedge (36" x 36"), but I keep my head tilted back (I use a very very very thin pillow).   Even on a full body wedge, you would probably have to use your 3 pillows with your arthritic neck.  

Have you tried mask liners on your mask.  They help some people with comfort (and even a better seal also).  Your choice if you want to try these also, of course.
Download OSCAR
OSCAR Chart Organization
Attaching Files

Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies. 

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.  
Post Reply Post Reply
#20
RE: Brand New Need help please
Thanks Half Asleep (great name!) Yeah tough situation for sure. You’re right about the wedge- I got one from Amazon and still had to use my 3 pillows and it was just completely uncomfortable.Gave it to my husband to elevate his legs at night, worked great for  him so didn’t go to waste. Haven’t tried a mask liner-might help with redness but not sure if it will stop it from denting my face when I pull it tight. Worth a try though. Thanks for the suggestion. I think maybe because I have really high cheekbones the masks just can’t confirm so get air blowing out the sided sides. 
Btw, what did you think about  most recent chart and would you recommend any setting changes? Didn’t use it last night so the redness and swelling subsided some.  I’m still breathing better after using it for a few nights so know it helps me hoping I can find a mask solution, then maybe can try positioning my head more to the side? Usually don’t move all night. Argh, so frustrating!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Brand New - help please Twoelephantsintheroom 2 299 10-23-2024, 05:09 PM
Last Post: Twoelephantsintheroom
  [CPAP] Brand New to all of this and not sure how to read OSCAR results Rngr503 5 320 10-21-2024, 02:39 PM
Last Post: OpalRose
  [Equipment] Brand new machine prompting to change mask, hose, filter ttsoldier 2 216 10-21-2024, 11:56 AM
Last Post: ttsoldier
  [Diagnosis] Help...brand new to everything SleepyKTR 0 182 07-25-2024, 09:19 AM
Last Post: SleepyKTR
  US brand mouth type recommendations? alwyns42 2 370 06-03-2024, 06:55 PM
Last Post: Deborah K.
  Brand new to this Cheesedream 53 3,882 02-09-2024, 08:12 PM
Last Post: BoxcarPete
  I’m brand new and have a question Boba1241 6 691 12-22-2023, 08:54 AM
Last Post: eok361


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.