[CPAP] Reading Sd Card

[Jmet4545]

Hi There, Newbie on the block.... New to CPAP And from the Uk

Im using a ResMed AirSense 10 AutoSet CPAP Machine with Heated Humidifier

Ive downloaded Sleepyhead and Rescan to review the data on on the SD card. I can't find any info on the Card. No files or hidden files visible. How do I check that the machine is writing to the card in the first place...... My sleep clinic are able to comunicate with device remotely so revisits to the clinic are reduced so the info must be there somewhere......

Like a lot of other people seeing these reports is far more helpful than the limited info on MyAir webpage.....

Please help

Mark T

[Walla Walla]

First check the small tab on the card and make sure it's not locked. Also to record on the card you have to left it in the machine while your sleeping to record detailed data. If you've tried both of those than you might just have a bad card and need to replace it.

[Sleeprider]

If you have the CPAP model there is only compliance data. Only the Elite and Autoset have efficacy data. There should still be several folders with data, so unlock or replace the card.

[Fats Drywaller]

He did say Autoset in his post, although it's not in his sidebar. Jmet/Mark, it'd be good to add the "Autoset" to your profile along with mask make & model if you can determine that.

As for using the card, push the card into the Resmed machine all the way so it clicks and latches and stays there. The display should show a message about "Preparing card" or whatever: do not remove power or your card. If that doesn't happen, something's wrong. Maybe a defective SD card, and try another one? It's always good to have at least one spare on hand. Whenever the red LED next to the card slot is lit, don't eject the card yet because it's being written to.