Can't get ResScan settings changes to SD card
I need to change some settings on my S-9 Elite, mainly the Set Pressure. I'm using ResScan 5.5 and an unlocked ResMed SD card. However when I change the device settings in ResScan and "apply" they don't seem to stay on the card. Here's what I do...
-Change device settings and apply.
- I don't see any changes in the ResScan settings tab.
- When I exit ResScan and resart it, I reload the change device settings screen and the S-9 device does not come up as an option; just a blank SD card.
-If I click on Download, a message pops up saying there are not devices available.
- However, the following files are in the card's SETTINGS folder:
Settings.crc
Settings.ecp
SettingsTarget.crc
SettingsTarget.tgt
-If I put the card back into the CPAP machine, it won't run unless I follow instructions to do a data re-write to the SD Card.
- If I do that, the card is erased and data stored on the machine is recorded to the card and I am back to square one.
Help???
RE: Can't get ResScan settings changes to SD card
Welcome to the forum,
Pressure changes are made on the Cpap itself. Once you do that, the Cpap will write the correct info onto the card.
Get the Clinicians Manual:
http://www.apneaboard.com/adjust-cpap-pr...tup-manual
RE: Can't get ResScan settings changes to SD card
(02-27-2016, 01:18 PM)OpalRose Wrote: Welcome to the forum,
Pressure changes are made on the Cpap itself. Once you do that, the Cpap will write the correct info onto the card.
Perfect, thanks. Works great!