Continous air out of vent nasal mask

[staceyburke]

Without looking at OSCAR there is no way to know but from my experience I will offer this. My events were excellent but I could not stop leaks (pillows mask) so I lowered my low number. It was 9.4 and I reduced it to 7. My leaks went down to acceptable levels and no more events than before. It has only been 2 nights so we will have to see if it continues to “work”.

[Nad402]

I’ve changed settings from 4-20. Now 5.5-18. Still showing leaks tried chin strap have done taping using nasal mask  so still severe dry mouth even with mouth taped my respiratory lady said only reason dry mouth sleep with mouth open need full face. But done that also still severe or worse dry mouth with full face

[staceyburke]

There are other ways and better ways. Read my link at the bottom about collar. There are examples showing the difference between with and without.

Knightsbridge DUAL BAND Anti Snoring Chin Strap From Supplier #37 in the suppliers list at the top of the site.

Either or both together will work.

[Nad402]

I’ve changed settings from 4-20. Now 5.5-18. Still showing leaks tried chin strap have done taping using nasal mask  so still severe dry mouth even with mouth taped my respiratory lady said only reason dry mouth sleep with mouth open need full face. But done that also still severe or worse dry mouth with full face

[staceyburke]

We could see problems IF you would post OSCAR CHARTS.

[JMIKEG]

I’m new to Airsense 10 and trying different mask first time for nasal mask. I’m not new to Cpap have used series 9 resmed


Question 
Is it normal for Continous air flow out of vent when I just put on and all night? MyAir is showing leaks  I’m concerned about Continous air I read is coming from vent  on nasal mask. Also pillows 

Also severe dry mouth I’ve tried chin strap this happens with any mask even full face. I slept in recliner one night didn’t have this issue 

Anyone else.


I just started using an AirFit N20 mask.  The air flow out of the vent is huge.  And for the first time, my AirSense 10 machine is showing a red frowny face for mask leakage.  The mask is fine- it's the vent letting air out.