Hello Guest,
Welcome to Apnea Board !
/
Help Adjusting Settings based on Oscar data
|
Help Adjusting Settings based on Oscar data
|
rygonzo93
Posts: 3 Threads: 1 Joined: Apr 2024
Machine: Airmed 10
04-18-2024, 12:21 PM
Help Adjusting Settings based on Oscar data
Started CPAP treatment back in December, feels like I have either very good nights or very bad nights and not sure what the cause might be. Hoping others can look at the data and help me to try adjustments to improve sleep and consistency.
staceyburke
Posts: 3,666 Threads: 15 Joined: Jun 2020
Machine: Resmed AirCurve VAUTO
04-18-2024, 01:58 PM
RE: Help Adjusting Settings based on Oscar data
Raise your min to 7
It’ll be sure your EPR is set to FULL TIME EPR3
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed Cervical Collar - Dealing w DME - Chart Organizing
rygonzo93
Posts: 3 Threads: 1 Joined: Apr 2024
Machine: Airmed 10
04-18-2024, 03:43 PM
RE: Help Adjusting Settings based on Oscar data
Saw in the settings that it shows EPR at 3 and fulltime already. Does that mean I don't need to adjust or should I still adjust it?
Deborah K.
Posts: 1,731 Threads: 18 Joined: Apr 2020
Machine: ResMed AirCurve 10 Vauto
04-18-2024, 05:49 PM
RE: Help Adjusting Settings based on Oscar data
If it's already set at 3 that's good. Just leave it alone. By raising your minimum pressure to 7, EPR 3 will now be able to work. It could not work correctly with the 5 pressure.
Machine: ResMed AirCurve 10 Vauto
Mask: Bleep DreamPort Sleep Solution
gainerfull
Posts: 434 Threads: 8 Joined: Apr 2022
Machine: Resmed AirSense 10 Autoset
04-18-2024, 06:02 PM
RE: Help Adjusting Settings based on Oscar data
To follow up, look at the green jagged line on your flow rate chart and notice you only see it part of the time. That's because your min pressure is too low. Optimally you'll want EPR to work full time so that is why others have recommended raising your minimum pressure.
rygonzo93
Posts: 3 Threads: 1 Joined: Apr 2024
Machine: Airmed 10
04-19-2024, 10:07 AM
RE: Help Adjusting Settings based on Oscar data
Adjusted the minimum pressure up to 7 last night and had one of the best nights of sleep I have had in a long time. Cannot thank you all enough!
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Oscar Data | Copperfld | 1 | 93 |
Yesterday, 01:49 PM Last Post: Deborah K. |
|
| Help analyzing OSCAR data - CA's? | alemon | 52 | 3,213 |
11-10-2024, 05:47 PM Last Post: PeaceLoveAndPizza |
|
| Airsense 11 Autoset oximetry data not showing up in OSCAR | Sleepy Willy | 7 | 204 |
11-10-2024, 03:10 PM Last Post: e727147 |
|
| Help with adjusting settings after good modifcations | jake.love | 1 | 94 |
11-10-2024, 12:16 PM Last Post: Jay51 |
|
| Help with adjusting | JonHG | 0 | 86 |
11-10-2024, 11:22 AM Last Post: JonHG |
|
| Learning to interpret OSCAR data | Schnoozer | 4 | 310 |
11-08-2024, 01:06 PM Last Post: Schnoozer |
|
| Help with adjusting settings | jake.love | 3 | 205 |
11-07-2024, 05:23 AM Last Post: jake.love |
|
/
Help Adjusting Settings based on Oscar data
