Flashair - new CONFIG options

[AlanE]

Flashair Dev site has posted some new CONFIG options. Some of these were available since FW 1+ and should work with W-02 and above.

[WLANSD]

ID=SMITH’S_CARD
DHCP_Enabled=YES
IP_Address=
Subnet_Mask=
Default_Gateway=
Preferred_DNS_Server=
Alternate_DNS_Server=
Proxy_Server_Enabled=YES
Proxy_Server_Name=yourproxy.com
Port_Number=8080


Enable DHCP Client (DHCP_Enabled)
Set whether to enable or disable DHCP client as follows.
YES (Default) Enable DHCP client
NO Disable DHC client

IP Address (IP_Address)
When DHCP client is disabled, set the IP Address. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Subnet Mask (Subnet_Mask)
When DHCP client is disabled, set Subnet Mask. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Default Gateway (Default_Gateway)
When DHCP client is disabled, set the Default Gateway. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Preferred DNS Server (Preferred_DNS_Server)
When DHCP client is disabled, set the Preferred DNS Server. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Alternate DNS Server (Alternate_DNS_Server)
When DHCP client is disabled, set the Alternate DNS Server. Default value is "0.0.0.0".
When "DHCP_Enabled=YES", values are ignored.

Enable Proxy Server (Proxy_Server_Enabled)
Set whether to enable or disable Proxy Server as follows.
YES Enable Proxy Server
NO (Default) Disable Proxy Server

Proxy Server (Proxy_Server_Name)
Set the domain name or IP Address of Proxy Server. Default is empty.
When "Proxy_Server_Enabled=NO", values are ignored.
Example:
Proxy_Server_Name=yourproxy.com
Proxy_Server_Name=123.123.0.1

Proxy Server Port Number (Port_Number)
Set the Port Number of Proxy Server. Default value is "8080".
When "Proxy_Server_Enabled=NO", values are ignored.

Now we can set a static IP address, subnet mask and gateway. Handy for those that have issues with DHCP assigning an IP to your card.

[sonicboom]

Thanks for this helpful info, AlanE

[0rangebear]

Did you get the flash air to work on ResMed AirSense 10 Autoset

[sonicboom]

Did you get the flash air to work on ResMed AirSense 10 Autoset

Yes using Flash pap

[kwhenrykerr]

AlanE