Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help with Bipap settings
#1
Help with Bipap settings
Just go a Bipap yesterday because it seems to be better for sleep apnea/uars than a regular cpap. My most recent sleep study has me with an ahi of 15 and a Rdi of 18. I managed to get a basic setting to start with and have downloaded oscar. After my first night, I feel a bit crappy, but have an Rdi of 2.07. Could someone help me with adjusting the settings? I've posted a picture of my oscar results from last night.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#2
RE: Help with Bipap settings
Welcome, and congratulations on getting an excellent machine and using Oscar.

Could you do some reformatting and then post another screenshot? A fair amount of crucial information is missing from the first one. Here's what to do:

* Close the calendar (little triangle to the left of today's date).

* Close the right panel.

* Zoom all the way out so the graphs all show the whole night.

* Stack your graphs as follows:

Events
Flow rate
Pressure
Leaks
Flow limitations
Snores.

To get those graphs into one screen shot, grab the horizontal gray bars that separate the graphs and move them upward. To change the order of your graphs, just drag them up or down.
Post Reply Post Reply
#3
RE: Help with Bipap settings
Hi bioshen!  -  Welcome
I need you to do a couple of things first, so we can better see your data.  First, click the little triangle next to the day, "Sat", in order to minimize your calendar.  You can also perform this step by either pressing the "F9" key or selecting it from View ⇾ Daily Calendar.   Next, you need to turn off the Right Sidebar.  This is done by either pressing the "F10" key or selecting this option in, View ⇾ Right Sidebar.  Finally, make sure that you have scrolled to the top of the screen in both the left "Statistics Window" and the right "Graphs Window".
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: Help with Bipap settings
Like this? I think I did it right.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#5
RE: Help with Bipap settings
Almost! We do need to see the left panel, though.
Post Reply Post Reply
#6
RE: Help with Bipap settings
Ok, I think I got it now.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#7
RE: Help with Bipap settings
OK good on the chart. It appears your mask fit or adjustment is causing some brief but high leak bursts. It's likely a cause for sleep disruptions. Events that are highest are Central, which are probably going to be treatment emergent AKA using the PAP has increased your venting of CO2 that your body hasn't had time to adjust to yet.
Mask Primer

Positional Apnea

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#8
RE: Help with Bipap settings
I took my mask off a couple times to go to the bathroom, perhaps those are the times. As of now, should I just stay the course and keep the same settings or do I need to adjust anything?
Post Reply Post Reply
#9
RE: Help with Bipap settings
If it was comfortable or at least as good as can be expected, I'd go again with same settings.
Mask Primer

Positional Apnea

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#10
RE: Help with Bipap settings
I agree with Dave. Let’s see how things settle in with these settings before considering any fine-tuning. Could you post another chart in a couple of days? Be sure to describe how rested you’re feeling. When your numbers are good, the experience is at least as important.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Treatment] BIPAP Settings - ResMed AirCurve 11 Vauto dcbauman 20 720 12-17-2024, 03:42 PM
Last Post: Sleeprider
  [Treatment] Need help adjust BiPap settings gnowjneb 1 159 12-12-2024, 11:57 PM
Last Post: gainerfull
  need help with a new BIPAP Hanma 2 213 12-09-2024, 07:29 AM
Last Post: Hanma
  New BiPAP User - Assistance with Settings weepingwillow 34 1,265 12-05-2024, 03:00 PM
Last Post: Sleeprider
  IVAPS bipap settings KazzaRazza 6 247 12-01-2024, 06:25 PM
Last Post: SarcasticDave94
  [Treatment] Persistent Hypopnea and Unclassified Apnea Issues with BiPap Settings behtaaash 7 543 09-09-2024, 11:57 AM
Last Post: Jay51
  Seeking Advice on BiPAP AirCurve 10 VAuto Settings for Upper Airway Resistance Syndro chacha897d 1 399 09-07-2024, 08:13 PM
Last Post: CPAPfriend


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.