Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help with initial settings for cpap machine
#1
Help with initial settings for cpap machine
My wife tested positive for Covid, and had to reschedule her meeting with the doctor who was going to set up the machine for her.

Is it possible for anyone on this board to give a good starting point for her settings on the Airsense 10 autoset? 

Her sleep study chart is attached.
Post Reply Post Reply
#2
RE: Help with initial settings for cpap machine
Start with this:
Mode: Autoset
Minimum pressure: 7.0
Maximum Pressure 12.0
EPR: On Full-Time
EPR Setting: 2

Rationale. Good generic starting pressures for self titration on auto CPAP. Consideration of high flow limitation and snore, predominately supine apnea. We will look at results after one night and optimize or refine. Tendency for positional apnea should be noted as indicated by clusters of events. Please read this: https://www.apneaboard.com/wiki/index.ph...onal_Apnea Please provide a good OSCAR chart and qualitative feedback from your wife regarding comfort. OSCAR is free. install on PC, laptop or Mac. Instructions for Organizing Oscar Charts and Attaching files are included in my signature below.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Help with initial settings for cpap machine
Thank you again. Thank you for the link to the article about positional sleep apnea. I have OSCAR installed now, so tomorrow I should be able to post a chart of her first night with the CPAP.
Post Reply Post Reply
#4
RE: Help with initial settings for cpap machine
Friendly reminder, make certain you have an SD card inserted in the slot under the silicone door on the left side of the AutoSet before sleeping to store data for OSCAR.

SD card standard sized with 2-32 GB capacity.
Mask Primer

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#5
RE: Help with initial settings for cpap machine
yes, it has the original SD card. It has been cleaned of all old data, so it should be good to go.
Post Reply Post Reply
#6
RE: Help with initial settings for cpap machine
[attachment=55911]
[attachment=55910]
[attachment=55909]
Last night went alright, but I think it isn't the best data due to just getting used to having something on her face.  She did manage to get some sleep, and there are a few hours that may be helpful.  

Here's what we got from OSCAR.  I'm guessing that tonight we will have a little better data.  Also, the time wasn't set correctly on the machine, and it was off by an hour and a half.  So, that will be correct tomorrow as well.
Post Reply Post Reply
#7
RE: Help with initial settings for cpap machine
First let me ask you to read the Organize your Oscar Charts wiki in my signature. A single screenshot could be so much better.

She only used the machine 4-hours, which is a pretty fair start and AHI of only 0.5 which is excellent. Get the time up to 7 hours and that would be excellent. Obstructive apnea was well controlled. I still see some flow limit so I'm going to have you increase EPR to 3 and reduce maximum pressure to 10.0. Hopefully these changes will improve tolerance.

Mode: Autoset For Her or Soft
Minimum pressure: 7.0
Maximum pressure 10.0
EPR full-time at setting 3
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#8
RE: Help with initial settings for cpap machine
Thank you. I have adjusted the charts in OSCAR now, and the next one will be right.

I changed the settings on the machine. We'll see how it goes.

Thanks again,

Jerry
Post Reply Post Reply
#9
RE: Help with initial settings for cpap machine
I had a terrible migraine yesterday, and was not able to use a computer.  Here is new data from last night's sleep.  She went to sleep with a neck brace on to hold her neck in alignment, and that seems to help her with keeping her airway open.  She put the machine on after waking up around 4am.  So the data is for the second phase of her sleep.

She said that the new settings felt much more comfortable and natural.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#10
RE: Help with initial settings for cpap machine
It looks to be what we want out of therapy, quiet, non-disruptive and effective pressure that is comfortable. Next step is to get therapy time up. I hope she feels encouraged to use the therapy longer since we have found a comfortable range. Not bad for a first session.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help with OSCAR, settings and incident-new to CPAP jimbawb 0 47 9 hours ago
Last Post: jimbawb
  Help optimizing CPAP machine settings VikingFan2408 12 360 Yesterday, 09:48 AM
Last Post: G. Szabo
  CPAP/APAP SETTINGS CpapGuy24 1 150 12-14-2024, 07:29 PM
Last Post: G. Szabo
  Buying CPAP machine for non United States resident ivan007 7 719 12-12-2024, 06:47 AM
Last Post: Hmm888
Ohmy [Pressure] My CPAP machine Jill Doe 2 195 12-08-2024, 09:40 PM
Last Post: Sleeprider
  Day 1 using the BMC G3A20 CPAP machine I got from my brother. liuzilong 0 141 11-28-2024, 10:11 PM
Last Post: liuzilong
Wink New CPAP User Seeking Advice on Pressure Settings wsswms 2 296 11-25-2024, 12:55 PM
Last Post: Deborah K.


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.