Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
BTW -- If there is a ResMed Oximetry Adapter attached to your S10, it remains powered even when the machine is off -- thus adding unnecessary use hours to the expensive laser finger probe. I added a small 9-pin extension cord between the sensor and machine and unplug the extension after a sleep session. Far easier to replace a cord with pin wear than the oxygen sensor. So far, no issues after five years.
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
A second sticker in that location is normally occupied in U.S. models by a FCC compliance sticker relating to the communications modem. I would not expect to see that on a European machine. I have read this thread and stayed out of it, but I am completely convinced you have a brand new machine of very recent manufacture date, and equipped with a side panel rather than the humidifier chamber. It can easily be converted. I don't know why you have such suspicion of this this device, but every piece of evidence argues against your concern that it may be used or refurbished.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-06-2022, 11:26 AM (This post was last modified: 04-06-2022, 11:27 AM by Dario892.)
RE: I Suspect My AutoCPAP is Used
(04-04-2022, 12:53 PM)Sleeprider Wrote: A second sticker in that location is normally occupied in U.S. models by a FCC compliance sticker relating to the communications modem. I would not expect to see that on a European machine. I have read this thread and stayed out of it, but I am completely convinced you have a brand new machine of very recent manufacture date, and equipped with a side panel rather than the humidifier chamber. It can easily be converted. I don't know why you have such suspicion of this this device, but every piece of evidence argues against your concern that it may be used or refurbished.
I suspect it is used for various reasons: - the machine is scratched - The cover cannot be pulled out. I've tried all sorts of ways. It's really jammed. So it could be a faulty airsense 10 - At the bottom of the cover there is a sign. I attach the photos. The seller is willing to replace the machine with a new one, but I'm undecided whether to ask for a return at this point. The seller also told me that the sign at the bottom of the cover is present in all airsense 10 machines ... The airsense 10 has been used for a few hours by necessity, but in the presence of a defect there should be the resmed guarantee for the return and therefore the refund.
