Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
I have the F2 full face mask and have had it for a long time. I struggle with mask leaks from time to time, but lately it is miserable. The leaks are around 100 for the past couple weeks. I have an ASV machine. The thing is I do the mask fit and it is good. The mask is snug and have no problems when I fall asleep, but I get up and I have the frowning face for leaks. I have central sleep apnea and I don't know it it is so bad that the machine's pressure gets so high it pushes the mask around. I do have a call in to the doctor.
I just set up Oscar and the pressures are set at Epap 7, PS 4-12. Oscar doesn't have any details for the leak amount. I hadn't had a SD card in it.
Umm…you have to have the SD card in to get the leak data. Record a couple of nights and post the Oscars here. Then, you’ll be able to get more relevant input on issues. You aren’t getting proper therapy unless the leaks are controlled.
Are you meaning an F20 mask? And have you been getting regular replacements for cushions? They degrade and get leaky.
Someone will be along who’s familiar with ASV. That would be above my pay grade.
But great your cushions are current. Our faces can change shape dramatically when we’re asleep. I was horrified when I looked at my face in the middle of the night a few weeks ago, and I looked like a cabbage patch doll.
Let’s get you some help with your Oscar charts and go from there. There are also a lot of posters with F20’s.
Machine: Remediated Dreamstation APAP-CPAP Mode Mask Type: Full face mask Mask Make & Model: Airfit F20 Humidifier: Built In CPAP Pressure: CPAP 15cmH2O CPAP Software: OSCAR
This was my lastest chart. I tried something new and it improved it greatly although I see the machine shut down for a time period again. I took a strap and strapped it over the top of the mask where the hose connects to push it into my face more. I have the mask so tight how it already is. My face was pretty marked up and the bridge of my nose was sore.
I have used the Resmed aircurve10 for over 10 years now with the Amara full face mask. Due to air swallowing, noisy air leaks and excessive drying of gums ( even with humidification adjustments). I am trying a chin strap and the nasal mask resmed n20- my ahi numbers are not bad with it at about 5 but it shows the red angry face for high air leaks. I have tried the basic model and the one with foam seal and both are fairly comfortable. I feel like the mask fits well enough so I would like to try the mask fit option to adjust the mask I guess. I have looked but do not see the "run mask fit option" on my options screen- is there another setting that allows that option to show up? Thanks anyone/everyone
Here are my last 2 nights. It looks like I have my leak issue solved. I just had to really tighten the straps. Does everything look good to you. Again thank you for the help. At least I have another tool to check out what is going on when I am having troubles.
