Noise Problem with Air Curve10 Vauto
Hello Everyone
I have a Air Curve10 Vauto with FX20 Airtouch mask and I have several problems:
1) Machine is about 18 months old and has become more noisy during the night
2) Machine starts on its own in the morning after I switch it off
3) I have moved to a different state and my provider is not providing service anymore (from NY To PA) Where do you think I should be able to get service for the Machine
Thanks in advance
RE: Noise Problem with Air Curve10 Vauto
Noise often times is a leak somewhere. Mine is the water tank - make sure it is seated or try a new one. All air lines that there are no holes, tightly fitted. Mask is not blocked in the ventilation ports.
If it is turning on or off expectantly make sure the auto start is turned off. We have had a number of people that have had problems with it.
RE: Noise Problem with Air Curve10 Vauto
It depends on the noise. Is it just an air leaking or a whining sound that changes in pitch with inhale and exhale?
If it's just an air leak, then you'd want to confirm connections at hose, mask, and humidifier to be certain they're seated firmly.
If the whining is your issue, then it would be likely a pneumatic block failure that has cropped up in some ResMed's. This could be a warranty issue, likely results in replacement of PAP.
Mask Primer
Positional Apnea
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
RE: Noise Problem with Air Curve10 Vauto
(03-13-2022, 09:10 AM)staceyburke Wrote: Noise often times is a leak somewhere. Mine is the water tank - make sure it is seated or try a new one. All air lines that there are no holes, tightly fitted. Mask is not blocked in the ventilation ports.
If it is turning on or off expectantly make sure the auto start is turned off. We have had a number of people that have had problems with it.
I am quite sure it's not an air leak. Where do I turn to check how to activate the warranty?
Thanks for answering me
RE: Noise Problem with Air Curve10 Vauto
You would contact the DME where you purchased your CPAP.
RE: Noise Problem with Air Curve10 Vauto
(03-13-2022, 11:49 AM)Crimson Nape Wrote: You would contact the DME where you purchased your CPAP.
Thanks for the quick response
The problem is that I moved from NY to PA last year and the DME provider is not allowed to provide service in PA. So I feel a bit stuck. I have bought supplies from a local place.
RE: Noise Problem with Air Curve10 Vauto
You can change your DME, just check your insurance provider for one in your area that is in your insurance network.
RE: Noise Problem with Air Curve10 Vauto
Have you checked with your previous DME for an affiliate in your area?
RE: Noise Problem with Air Curve10 Vauto
If you have had the VAuto for less than 2-years, insurance isn't involved. It is a warranty repair. You just need to find a Resmed dealer in your area, and refer your purchasing DME's name.
RE: Noise Problem with Air Curve10 Vauto
(03-13-2022, 12:10 PM)staceyburke Wrote: You can change your DME, just check your insurance provider for one in your area that is in your insurance network.
Thanks
