More Problems with EncorePro
After more hours of fooling arround with EncorePro, I finally got it to recognize my card as "The media belongs to a current patient". However to get there I had to format the card and do a few other things I no longer remember. It seems that a patient ID number makes it happy.
Now Encore says "This media does not contain any data". I put the card in my AVAPS machine and wait for the "writing to card" to finish. I put it back into the computer still get the no data message.
Help!
RE: More Problems with EncorePro
Which version of Encore Pro are you using? The 1160 needs the latest version?
Can you use windows explorer and actually verify that the files are present?
RE: More Problems with EncorePro
Which version of Encore Pro are you using? The 1160 needs the latest version?
I am using Ver 2.5.21.0 (the one available here)
Can you use windows explorer and actually verify that the files are present?
The card has data, looks like Philips data as far as I can tell
Please let me know what versions of SleepyHead, EncoreBasic, and EncorePro will read my 1160 card, if you have the information available. I very much need to get the data to get this new (to me) machine tuned properly. I liked EncoreBasic but will use any program that works.
Thank you for your help.
Regards, Jim Gereg
RE: More Problems with EncorePro
I believe the latest version of Encore Pro is 2.12.7.xx, though it could be later than that (2.13.xx.xx or 2.14.xx.xx).
The latest build of Sleepyhead should read it too. That's version 0.9.6. You can find it
Here
