Can't get ResScan settings changes to SD card

[jborden5]

I need to change some settings on my S-9 Elite, mainly the Set Pressure. I'm using ResScan 5.5 and an unlocked ResMed SD card. However when I change the device settings in ResScan and "apply" they don't seem to stay on the card. Here's what I do...

-Change device settings and apply.
- I don't see any changes in the ResScan settings tab.
- When I exit ResScan and resart it, I reload the change device settings screen and the S-9 device does not come up as an option; just a blank SD card.
-If I click on Download, a message pops up saying there are not devices available.
- However, the following files are in the card's SETTINGS folder:
Settings.crc
Settings.ecp
SettingsTarget.crc
SettingsTarget.tgt
-If I put the card back into the CPAP machine, it won't run unless I follow instructions to do a data re-write to the SD Card.
- If I do that, the card is erased and data stored on the machine is recorded to the card and I am back to square one.

Help???

[OpalRose]

Welcome to the forum,
Pressure changes are made on the Cpap itself. Once you do that, the Cpap will write the correct info onto the card.

Get the Clinicians Manual: http://www.apneaboard.com/adjust-cpap-pr...tup-manual

[jborden5]

Welcome to the forum,
Pressure changes are made on the Cpap itself. Once you do that, the Cpap will write the correct info onto the card.

Perfect, thanks. Works great!