Thanks
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Resmed A10 Climate Hose Not Holding Mask Hose
|
10-08-2016, 04:03 AM
Resmed A10 Climate Hose Not Holding Mask Hose
My A10 hose rubber end fitting seems to have stretched and now the mask hose pops out on it's own. Anyone experience this? Is there a DIY fix?
Thanks
10-08-2016, 07:28 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
No fix.
Get a new hose and be more careful next time not to stretch it.
10-08-2016, 08:47 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
You can use electricians tape on the mask to increase diameter and it will hold. A good rubber band or zip-tie may also keep it secured. This has been reported fairly frequently. Ultimately you will need a new hose, but these fixes will work. Try to avoid disconnecting so often, or at least don't stretch the connection end by pulling at an angle rather than straight off.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
10-09-2016, 11:38 AM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
Hi player,
psychomike has a thread here on this board called ""ClimateLine" issues." He has a solution that will help you. Good luck with your temporary fix, 'till you are able to get a new hose.
trish6hundred
10-09-2016, 12:42 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
The zip tie works well. My Climateline was held on by a zip tie all last winter. The only thing that I did not do was to knock down the sharp edges with an emery board which is a good idea. Frankly, I view this as more than a temporary fix. This may be a baling wire and chewing gum fix but I see no need to throw away a hose that is perfectly good in all other ways. I have gotten a second Climateline hose as a back-up just in case.
Best Regards, PaytonA
Admin Note:
PaytonA passed away in September 2017 Click HERE to read his Memorial Thread ~ Rest in Peace ~
10-09-2016, 11:27 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
The mistake I made was fitting it (stretching it) onto my kitchen sink tap and running super hot water through the hose.
10-09-2016, 11:35 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
OOPS!!!
Admin Note:
PaytonA passed away in September 2017 Click HERE to read his Memorial Thread ~ Rest in Peace ~
10-10-2016, 02:59 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
(10-09-2016, 11:27 PM)player Wrote: The mistake I made was fitting it (stretching it) onto my kitchen sink tap and running super hot water through the hose. Hmmm, I don't recall seeing that method in the cleaning instructions. This is self-inflicted, but using a zip-tie, pipe clamp or similar should still work.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
10-11-2016, 09:48 AM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
Well, how old is the hose? These are supposed to be replaced every 3 months if memory serves me. If it is worn it is time for a new hose for sure. I have two of the climate hoses and neither of them do this. I don't use them anymore due to sanitation issues. They are tough to clean properly and I don't need to be breathing in mold or mildew spores, that defeats the purpose of the thing. So for the sake of ones health replace it. The hose is telling you it is time. Now, if the hose is only a week old then that is an issue. Then I might blame the mask interface.
10-11-2016, 06:29 PM
RE: Resmed A10 Climate Hose Not Holding Mask Hose
The hose is a year old. When you buy this stuff out of pocket it is tough to throw away a good hose...
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
[CPAP] Resmed Mask F30i - Tabs keep breaking.. Anybody else have this problem? | Snacko | 7 | 2,849 |
11-26-2024, 01:46 AM Last Post: MisterSpike |
|
Resmed Climateline Vs Oxy Hose | Akeyla | 8 | 717 |
11-15-2024, 07:31 PM Last Post: StuartC |
|
Dreamstation heated hose temp repair fix | Corvette817 | 12 | 4,417 |
11-12-2024, 01:56 PM Last Post: Beenie Bay |
|
New Resmed mask | yankees123 | 16 | 1,352 |
11-06-2024, 06:58 AM Last Post: Dennis45 |
|
ResMed F40 mask questions? | WCR1950 | 17 | 1,806 |
10-29-2024, 03:38 PM Last Post: super7pilot |
|
Falling asleep holding breath | onetwothree | 8 | 456 |
10-28-2024, 12:33 AM Last Post: onetwothree |
|
[Equipment] Brand new machine prompting to change mask, hose, filter | ttsoldier | 2 | 222 |
10-21-2024, 11:56 AM Last Post: ttsoldier |