SD Card Data

[pogosix]

Hello all you sleepyheads,

I looked at my SD card by going to "Computer" then "Properties" and it shows 3.68 GB free of 3.72 GB. This tells me that my machine is not saving any data.

Here are the settings; can anyone tell what I must do?

Thank You!

Mode S/T
IPAP- 16.0
Epap- 8.0
BPM - 12
Ti - 1.0
Rise Time- on
Rise Time- 10
Ramp Start Pressure- 4.0
Patient Disc- Off
Tubing Type- Off
Tubing Type- 22
Apnea- Off
Mini Vent- Off
Backlight- Off
Language- Eng
HPA/CM H20- CMH20
Setup Pa- Leak
Humidifier- 5
Reset Th- no
Reset Bl - no
Provider- Off

******************************************************

[trish6hundred]

Hi pogosix,
Which Respironics machine do you have?
I think if you take out the humidifier tank and turn the machine over, you'll find the model number on the bottom.

[pogosix]

Hi pogosix,
Which Respironics machine do you have?
I think if you take out the humidifier tank and turn the machine over, you'll find the model number on the bottom.

The model number is 1061420


Thanks for responding

[trish6hundred]

Hi pogosix,Usually, there is a name such as PR System 1 on the machine or something like that, I'm sorry if I confused you with my question.

[PaulaO2]

If the machine says Phillips Respironics and has the word "Plus" in the name, it is not data capable so the only thing it is writing on the card is hours used.

I think the 1420 is not data capable. I tried to look it up and couldn't find anything on it. PR has an odd system for identification.

[zonk]

The model number is 1061420

BiPAP S/T
Specifications http://bipapst.respironics.com/Specifications.asp
Quick start guide http://bipapst.respironics.com/PDF/BiPAP_QSGuide.pdf
Brochure http://bipapst.respironics.com/PDF/BiPAP_Brochure.pdf

Respironics BiPAP ST (newer, "PR System One" model) manual available via email (section 3)
http://www.apneaboard.com/adjust-cpap-pr...tup-manual

[big_dave]

Hello all you sleepyheads,

I looked at my SD card by going to "Computer" then "Properties" and it shows 3.68 GB free of 3.72 GB. This tells me that my machine is not saving any data.

It may be working perfectly well, but an SD card can store far more data than a CPAP machine needs. Your card has 40 MB in use, which is more than what my machine has used in 14 months. My ResScan data folder contains 8.9 MB of data for 294 nights. (Sometimes if I'm sleeping well I don't bother downloading it). Granted, I'm using an outdated machine made by ResMed, with limited data capabilities, but CPAP data files really aren't that big.

[zonk]

Provider- Off

From Quick start guide http://bipapst.respironics.com/PDF/BiPAP_QSGuide.pdf

Provider mode: You can choose “ on ” or “off ” to enable or disable provider mode. Selecting “on” will put the device in provider mode
(and the device will not automatically return to patient mode when the screen times out or you select the Back option).
Selecting “ no ” keeps the device in patient mode

Setup parameter display ... Leak, RR, Vm, Vte

Setup parameter display: You can select which measured parameters will display on the Monitor Pressure screen. Choose from Leak, RR (Respiratory Rate), Min vent, or Vte. See the Measured Parameter section of the User Manual for more information

[spdklls99]

My PRS1 says the data card is 100% free all the time...yet there is actually 5 weeks worth of data on the card at present

[SuperSleeper]

My PRS1 says the data card is 100% free all the time...yet there is actually 5 weeks worth of data on the card at present

The data takes up a minuscule amount of space. I think that it's a rounding issue... so that you might have something like 99.7% of space available, and it's rounded up to 100%. Once it gets down to 99.4%, it will probably say you have 99% free.