Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Symptoms] CARD ERROR
#1
CARD ERROR
When I go thru the procedure to enter provider mode - I receive the message "SD Card:Remove and Reinsert" this happens after I took my machine in to have the pressure checked out.

I remove power, remove/reinsert card and power the machine up. Get the prescription accepted message and all appears OK. Just unable to enter provider mode??

Additionally, the option to view the AHI was no longer visible on the user setup screen, so apparently that option was changed.

Should I take the machine back to the home provider or purchase an another sd card and reprogram??


Post Reply Post Reply
#2
RE: CARD ERROR
Settings or "prescriptions" can be written to the SD card by the Encore software. They can be written as "set one time" or "set every time". Your DME (CPAP seller) put the prescription on your card with the "set every time" option. This prevents you from changing settings and gives you the card error.

You can either format the card on your PC, or use a different card to allow you to change your settings.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#3
RE: CARD ERROR
Hi cknight109 and welcome to the forum
to show AHI/leak/PB ... you need to turn "on" in the clinical menu

you can get the manual for your machine via Email (section three .. make sure you ask for the right one)
http://www.apneaboard.com/adjust-cpap-pr...tup-manual

whats archangle said and also you can leave the card out till you get a new card.
when you insert a new card ... the machine write compliance data on the card, might be some flow data missing
Post Reply Post Reply
#4
RE: CARD ERROR
Hi cknight109 and WELCOME! to the forum.!
I echo what has been said so far but hang inthere for more suggestions and best of luck.
trish6hundred
Post Reply Post Reply
#5
RE: CARD ERROR
(11-28-2012, 04:57 AM)archangle Wrote: Settings or "prescriptions" can be written to the SD card by the Encore software. They can be written as "set one time" or "set every time". Your DME (CPAP seller) put the prescription on your card with the "set every time" option. This prevents you from changing settings and gives you the card error.

You can either format the card on your PC, or use a different card to allow you to change your settings.
OK the DME must have made the change, because prior to the past event I was ABLE to change settings.
I would prefer to use another card, I suppose the SD card in just a normal non-HC variety that I can purchase and configure the settings
per the prescription and enable the AHI display.
Post Reply Post Reply
#6
RE: CARD ERROR
(11-28-2012, 10:31 PM)cknight109 Wrote: OK the DME must have made the change, because prior to the past event I was ABLE to change settings.
I would prefer to use another card, I suppose the SD card in just a normal non-HC variety that I can purchase and configure the settings
per the prescription and enable the AHI display.

2 GB SD cards work. I've tried a few SDHC cards and haven't had any problems with them either.

Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#7
RE: CARD ERROR
(11-29-2012, 03:03 AM)archangle Wrote:
(11-28-2012, 10:31 PM)cknight109 Wrote: OK the DME must have made the change, because prior to the past event I was ABLE to change settings.
I would prefer to use another card, I suppose the SD card in just a normal non-HC variety that I can purchase and configure the settings
per the prescription and enable the AHI display.

2 GB SD cards work. I've tried a few SDHC cards and haven't had any problems with them either.

Thanks will pu one up today and give a "whirl" Happy Holidays
Charles

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Resmed Airsense 10 Error 006 lanecito 2 282 11-03-2024, 06:24 PM
Last Post: PeaceLoveAndPizza
  Error Message GUI Lib Invalid from Dreamstation 2 amybinaz 5 546 10-21-2024, 12:56 PM
Last Post: rkreiple
  Resmed S9 Autoset an error message after changing the motor SealL30 5 1,225 10-06-2024, 10:45 PM
Last Post: Rickyricardo
  React Luna G3 - Error 85 SMWinnie 0 205 09-15-2024, 10:50 AM
Last Post: SMWinnie
  DreamStation cellular modem (info on troubleshooting 1-0 error code) soyjer 2 462 09-01-2024, 01:46 PM
Last Post: soyjer
  Resetting the motor error message on a ResMed 10 stagebuilder 7 1,892 08-15-2024, 04:51 PM
Last Post: chronic
Surprised Resmed Autosense 10 Auto set, error 006 ccryder 6 28,410 07-28-2024, 07:45 PM
Last Post: Phaleronic


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.