IntelliPap Pressure setting

[LSalings]

I need help. Got a new AutoAdjust D54 with Smart Flex and need to adjust the lower range upward; waking up gasping for air is no fun!  I requested the manual from the set up page, but what arrived does not seem to work with this machine.  Maybe it's too new?  If anyone out there has the home care/clinical manual for this machine, I'd greatly appreciate being able to raise that lower range to what I need now.  

[analog]

LSalings,
Sorry if you've already checked this; but have verified you have the right manual? There is a D64 as well, this is what I run. I believe it has different controls.

[alps]

I have a Devillbis Intellipap autoadjust APAP.  The model marked on the bottom reads DV54D.  I don't have the complete clinical manual but the following instructions will unlock the clinical settings:

To get to clinical setting on Intellipap autoadust  APAP DV54D:

DeVilbiss :
·         To unlock the prescription settings, make sure the blower is OFF (OFF should be shown on the display).

·         While pressing the DELAY and DOWN buttons, press the ON/OFF button to start the blower. The prescription settings are now unlocked and can be changed using the UP and DOWN buttons on the keypad.

·         Press the SELECT button to advance to the next setting.


·         The first value displayed on the LCD will be the mode.

Hope this helps.

Alps

[trish6hundred]

Hi LSalings,
WELCOME! to the forum.!
Good luck with CPAP therapy and getting your machine set.

[LSalings]

   It worked, thanks!!  Here's to breathing easy tonight!