Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Hey Guys, Help Tweaking machine
#11
RE: Hey Guys ,,Help Tweaking machine
EPAP treats obstructions, not IPAP.
Post Reply Post Reply
#12
RE: Hey Guys, Help Tweaking machine
OP’s current settings:

Min EPAP 4.0, Max EPAP 7.0.

Min IPAP 8.0, Max IPAP 16.0.

PS4.0 - 9.0.

Sleeprider: “Change IPAPmin to 5.0 and IPAP max to 8.0. Increase PSMax to 12. I’m on a phone but want to get these changes in ASAP. I still see a breath holding in the flow chart but if there is an open airway we need more PS to trigger a breath and if obstruction is present higher EPAP should help.”

I see that the increase in PSMax to 12 is addressed to the open airway possibility, but the recommended change to the IPAP settings seems unrelated to the EPAP that Sleeprider says would help if obstruction is present.

I’m wondering if Sleeprider wrote IPAP in his first sentence when he meant to write EPAP.
Post Reply Post Reply
#13
RE: Hey Guys, Help Tweaking machine
Ya I think he means epap as thr are no specific ipap setting unless u do the math, I’ll do it
Post Reply Post Reply
#14
RE: Hey Guys, Help Tweaking machine
Thanks for the responses guys
Post Reply Post Reply
#15
RE: Hey Guys, Help Tweaking machine
I think sleeprider has it as an awake event, rolling over etc.
If it was my chart I would have min epap6, but 5 is fine.
min epap 5 then add 1cm at a time if there are still significant obstructive events.
max epap 15 (default)
min ps 4 (default 3)
max PS 15 (default) moving to 19 to give the machine full range of pressure available. It will only use what it needs.

The guide at page 30 may help
https://www.resmed.com/us/dam/documents/...er_eng.pdf
mask fit http://www.apneaboard.com/wiki/index.php...ask_Primer
For auto-cpap, from machine data or software. You can set the min pressure 1 or 2cm below 95%. Or clinicians commonly use the maximum or 95% pressure for fixed pressure CPAP, this can also be used for min pressure.
https://aasm.org/resources/practiceparam...rating.pdf
Post Reply Post Reply
#16
RE: Hey Guys, Help Tweaking machine
Goodmorning,
So I had all my gear ready, breathe strip check, mouth piece check, water added check, eye goggles check, was watching tv and crashed without having mask   on. Woke up about 3am cursing myself and put it on thinking bad thoughts.For me the last 3 hours is where a rack up the majority of my events. needless to say I was pleasantly surprised to see I was under 5,which has almost never happened on my last leg of sleep cycle. Gas is somewhat rough but should be ok in a few hours. should I stay at this pressure a few days and try to lengthen the therapy?
Post Reply Post Reply
#17
RE: Hey Guys, Help Tweaking machine
couple more Thanks
Post Reply Post Reply
#18
RE: Hey Guys ,,Help Tweaking machine
(05-31-2019, 03:47 PM)Sleeprider Wrote: Change IPAPmin to 5.0 and IPAP max to 8.0. Increase PSMax to 12. I’m on a phone but want to get these changes in ASAP. I still see a breath holding in the flow chart but if there is an open airway we need more PS to trigger a breath and if obstruction is present higher EPAP should help.

Sorry for the typo. EPAP 5-8 and PS 12 max IPAP will be 20 with this. I really think you need to boost PS max to 12.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#19
RE: Hey Guys, Help Tweaking machine
So the settings on the machine last night were
Epap 5-8
Ps 4-12
But when viewing the study it shows the older previous settings but under the stats it shows it correct. Kinda strange. Let’s see if tonight it updates it correctly.
Post Reply Post Reply
#20
RE: Hey Guys, Help Tweaking machine
Last couple nights AHi remains about 6. Last nights results.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 305 284,924 10-28-2024, 07:30 PM
Last Post: ZacharySimon
Surprised Tweaking pressure? atep26 1 190 10-18-2024, 09:46 PM
Last Post: G. Szabo
  New machine vs. Old Machine - Same Model MrIvanDrago 1 270 10-10-2024, 08:20 AM
Last Post: Crimson Nape
  Tweaking Bilevel ahuman 25 1,736 09-10-2024, 12:36 PM
Last Post: ahuman
  Can use ASV machine as Bipap S/T machine? soyjer 17 873 08-07-2024, 08:30 PM
Last Post: soyjer
  [Treatment] Help with Oscar and tweaking settings DLorenzoD 3 554 12-29-2023, 12:49 PM
Last Post: DLorenzoD
  Central vs. OA Events: Switching Machines or Tweaking Current CPAP Settings? fjones416 4 786 12-14-2023, 12:28 PM
Last Post: SarcasticDave94


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.