Icon and Sleepy Head issue

[remltr]

I just picked up a F&P Icon Auto.

I am under the impression that Sleepy Head supports the FPH file type.

I have the current version of the software.

I am unable to get SH to open the FPH file or recognize it.

Am I misinformed or just not doing something properly?

[Beej]

I don't know if that is compatible.
Maybe try running this version of SleepuHead in the directory:
C:\Program Files (x86)\SleepyHead\SleepyHead-BrokenGL.exe

[remltr]

I don't know if that is compatible.
Maybe try running this version of SleepuHead in the directory:
C:\Program Files (x86)\SleepyHead\SleepyHead-BrokenGL.exe

No luck - the fph file is greyed out, as if it is not recognized.

Thanks for trying.

[KiwiGal]

I use sleepyhead with a new F&P icon Premo without any problems.
I got the machine in November and it works fine with sleepyhead version I downloaded in early January. I just put the F&P data stick into a USB port on my Windows 8 laptop, open Sleepyhead and click on the CPAP importer button on the Welcome screen ( the button has a picture of an SD card which is a bit counterintuitive). Sleepyhead indicates that it has found data and asks if I want to import it.

[remltr]

I use sleepyhead with a new F&P icon Premo without any problems.
I got the machine in November and it works fine with sleepyhead version I downloaded in early January. I just put the F&P data stick into a USB port on my Windows 8 laptop, open Sleepyhead and click on the CPAP importer button on the Welcome screen ( the button has a picture of an SD card which is a bit counterintuitive). Sleepyhead indicates that it has found data and asks if I want to import it.

Exact same procedure I am following. Just not getting the same results.

Thanks for confirming it "does" work.

[remltr]

It seems I can't even read any data off the machine either. It is just as if there was no therapy done at all. But the FPH files do exist and are around 4 mb in size.

[woozie38]

Hi, the most likely cause is your PC not acknowledging your USB port. F&P Icon + works fine with Sleepyhead. Perhaps you're using Windows XP. Just make sure your USB ports read before you go any further.