Need part replacement OR DIY fix ideas

[kissingfrogs2003]

I have a Resmed Airsense 10. Unfortunatly I am having an issue with the filter cover. The little door that holds the filter is attached to the main unit by a couple plastic latches/“housings” for the small pegs on the filter cover. But my peg holders/latches broke off ?

I can find replacement covers, but not the side/part of the machine where the cover attaches to. I tried using duct tape but it is not a great solution.

Hoping folks might know how to order the panel replacement (side opposite the humidifier) OR have a better-than-duct tape option for keeping the filter cover door securely attached to the unit AND mobile enough to replace the filter regularly.

[Big Guy]

The air filter door to my 10 AutoSet broke not all that log after receiving it. If you still have the piece that broke off, use some super glue. 

The DME supplier that I got the machine from, gave me a new door. 

Sounds to me that the side cover hinge broke and not the air filter door itself. The door isn't critical. Use some scotch tape and tape a corner of it to the side cover. 

I learned to be very gentle when it comes to opening that air filter door. That can be a challenge when you're 6-05 and weigh about 280 lbs., and used to forcing things when they don't go your way. 

[splitbolt]

I tried gluing the broken pin back on but it didn't last that long. I ended up using a strip of 1/2" medical tape to hold it closed. So far no problem.