Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

NEXT CHALLENGE: IMPORTING WELLUE 02
#21
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
If this was for last night, then it is off by a day.  It shows that your device started on Saturday, April 15, 2023, at 36 minutes, 54 seconds past midnight.  This means that this would be in your Friday's data.  If it was for last night, the file should be named, "20230416003654".

- Red
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#22
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
That explains it.  I started after midnight.
Huhsign  WARNING: It may take a while to sink in...I tend to get befuddled at times.
Post Reply Post Reply
#23
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
(04-15-2023, 12:43 AM)PDK287 Wrote: Ah - just to clarify my earlier comment: even the $12 fingertip monitor did actually "record" a full night of data in the ViHealth app. I just had to open the app and begin monitoring, and then could even lock my phone for the night. Even though the device had no local storage, the phone app received and stored all the real-time data from the whole night.

However, the only export options available for these recorded periods are CSV and PDF - no binary file. So, I was just wondering if that option only popped up for data recorded by oximeter models that had local storage, or something funky like that.

In any case, my theory doesn't seem correct, as I tried Wellue's cheapest oximeter with local storage (WearO2), and its data still does not give a binary export option from the app, even if I make sure it records locally and then transfers to the app after the fact. 

Try #3 will be the next cheapest (Oxylink), which is on the tested/approved list here - fingers crossed! I've also reached out to their support team for clarification, but don't have high hopes on that front.

To follow up on the above - even with the Oxylink, ViHealth is only giving me PDF and CSV export options - no binary option. I tried uninstalling and reinstalling the app, trying sessions that were recorded to the app in real-time vs. saved on the oximeter and later transferred. Nothing is working. 

I wonder if they removed the option in the newest app version or something - is no one else having this issue?


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#24
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
Looking at your device's specification states it only reports trends in 1 minute resolution.  The CheckMe, O2Ring, and SleepU report in 4 second intervals.  Based off the oximeter model comparison chart, the Oxylink is not shown to be compatible with any PC app.   The Oxylink's strong point is its remote monitoring from anywhere.  I wouldn't hold my breath that it produces a binary file.

Sorry!  Confused

- Red
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#25
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
Yeah, I did also just try both the Oxylink and the WearO2 with the PC program as well, but neither was able to connect. Oh well. So much for a sub-$160 O2 tracking option, I suppose! 

(It does seem like the iOS binary export option no longer works for the Oxylink, in any case - we may want to update the wiki at some point.)
Post Reply Post Reply
#26
RE: NEXT CHALLENGE: IMPORTING WELLUE 02
Ah, great - I see the Contec CMS-50F is on sale for $65 from Groupon right now. Just for any future thread-readers going down this same road, that seems to be the most affordable compatible option at the moment!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Data not importing SleepyCrow 2 150 12-13-2024, 01:18 PM
Last Post: SleepyCrow
  Today I learned: re-importing a single date to fix issues - version 1.5.3 SkyIsBlue 1 139 12-08-2024, 02:10 PM
Last Post: SkyIsBlue
  Oscar crashes when importing Wellue O2 ring data Armorwolf 24 1,055 12-08-2024, 01:11 PM
Last Post: Crimson Nape
  Export Wellue SpO2 data herenthere 0 167 11-25-2024, 07:37 PM
Last Post: herenthere
  Importing large lump of data into OSCAR PaulaO2 2 465 11-20-2024, 05:51 AM
Last Post: srlevine1
  Help with Resmed 11/Wellue O2 time sync SDCat 0 231 11-15-2024, 12:58 PM
Last Post: SDCat
Question Importing blood oxymetry data from Samsung Health Scarmen 7 2,948 10-27-2024, 01:36 PM
Last Post: LoudSnorer


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.