SD Cards - backup [SOLVED] Post 11

[Jeff8356]

Thank you.. I ran the process of File Preferences and checked the Import w/o asking for confirmation.

Go back and uncheck that box in preferences. Quit OSCAR, then restart. The window that has the "Specify" button should return.

[Crimson Nape]

You should validate the Time and Date setting on your AC10 too.

- Red

[ApneaticBill]

Thank you Red..  The time and date were updated two days ago.. At least that's done 

[ApneaticBill]

That did not work..
However, I did notice something(s)
1. Red suggested going to file/preferences and checking the box 'import w/o asking....'  There is no "preferences" under File.. Rather under OSCAR..  Thats where I went.. 
2. Upon rechecking.. I think this may be the issue??   UnderMemory and Startup Options.. there are 7 boxes to check
    One of them that is checked is Automatically load last used profile on start-up.
    Should that be unchecked while doing this new import?
    What boxes do you recommend checking on that entire page?  Currently, Automatically load last...; Warn when Importing....; Warn when previously unseen... are checked under the        Import tab.

[Jeff8356]

Bill,

You are correct sir.  The preferences are under OSCAR > Preferences, also by using Command + , (command + comma).

Try these settings and see if you get that screen back with "Specify" when doing an import:
   

Don't forget to quit OSCAR and restart.

The other settings on that page regarding compression are up to you.  They are not necessary but will usually make the OSCAR data files a little smaller on your computer.

[ApneaticBill]

Dang.. didn't work.. I have to say.. maybe a multiple time.. THANK YOU for sticking with me.
If you could access my computer like Apple can it would likely be done in a flash..

But.. Still no popup box

[Jeff8356]

Ok, lets try this....

• Quit OSCAR and any other apps
  

• Eject the SD card and remove it from your Mac
  
• Reboot and login again
  
• Insert the SD card back into your Mac
  
• Open Finder and verify the SD card is showing up in the left pane
  
• Open OSCAR and try to import again
  

See if that works...

[ApneaticBill]

This is what I get...  You can see it shows last nite

[Jeff8356]

And what happens if you click on the profile and select "Open Profile" (you can also double click the profile)...

[ApneaticBill]

Tried that earlier.. still shows only the old data I showed earlier.. 

Time for you to get some rest friend.. I've worn you out.

Bill