Sleepyhead problems

[1440 minutes]

New user.

I installed Sleepyhead and created a profile. I tried without success to update the program to 0.9-2.1. I received an error message: update failed. Can I use Sleepyhead with my OS? I am using a 64-bit verision of Vista.

I tried to import data from my SD card. It provided machine information: Philips Respironics System One RemStar Pro with C-Flex+ (460P) plus serial number, but then gave the following message:

No CPAP Machine Data Imported

I only slept one night with this machine. Do I need to put more time on this machine before Sleepyhead will import data?

[JJJ]

It provided machine information: Philips Respironics System One RemStar Pro with C-Flex+ (460P)

Right there is the problem. You need to install a patch to SleepyHead before it can read the data from a 60 Series machine.

[zonk]

It provided machine information: Philips Respironics System One RemStar Pro with C-Flex+ (460P)

Right there is the problem. You need to install a patch to SleepyHead before it can read the data from a 60 Series machine.

see post # 40 (page #4) for the patch link - posted by Sleepster ...Wiki Editor
http://www.apneaboard.com/forums/Thread-...ead?page=4

[1440 minutes]

Okay, I see that this software isn't setup for my machine. I tried to download the patch but it didn't work. I guess that I will wait until it's ready for my machine.

[trish6hundred]

Hi 1440 minutes and WELCOME! to the forum.!
Best of luck to you with your CPAP therapy.

[jfmusil]

You may have to go into sleepyhead and run as the administrator. Then update to version 2 then do the patch. You right click on the icon and then the third bar says run as administrator. That should fix your proplem.

[1440 minutes]

You may have to go into sleepyhead and run as the administrator. Then update to version 2 then do the patch. You right click on the icon and then the third bar says run as administrator. That should fix your proplem.

Thank you. I ran as administrator and it did allow me to update. However, when I tried to open the patch, I received the following error message:

This application has failed to start because mingwm10.dll was not found. Re-installing the application may fix the problem.

[dcgrafix]

You may need to un-install sleepyhead completely then go through the steps noted above.

It does work with your machine but I can't comment on using sleepyhead 64-bit version of Vista but It work fine in 64-bit version of win 7

[archangle]

You may have to go into sleepyhead and run as the administrator. Then update to version 2 then do the patch. You right click on the icon and then the third bar says run as administrator. That should fix your proplem.

Thank you. I ran as administrator and it did allow me to update. However, when I tried to open the patch, I received the following error message:

This application has failed to start because mingwm10.dll was not found. Re-installing the application may fix the problem.

You have to copy the patched version of sleepyhead.exe into the directory where the original sleepyhead file is stored and run it from there.

It's probably in C:\Program Files (x86)\SleepyHead or something similar.

[SuperSleeper]

Just as a reference, I updated the SleepyHead links and instructions in the download thread, located in the Private Files & Links forum (login required, register free here):

http://www.apneaboard.com/forums/Thread-...e-software

The Mac OSX patch and the PC patch for the Series 60 machines are listed there also.

Please follow the directions there at that link - as Arch said, you don't run (execute) the .exe file... rather, you simply replace the old .exe file with the patched .exe file.

ADMIN NOTE:
This thread is now closed. If you have a question regarding the SleepyHead software package, please go HERE.

To download the SleepyHead software, go here:
http://www.SleepFiles.com/SH/