11 hours ago
(This post was last modified: 11 hours ago by G. Szabo.)
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
Would you mind attaching a few days of your latest daily reports? Please turn the calendar off and ensure the instrument settings are visible on the left side at the bottom.
10 hours ago
(This post was last modified: 10 hours ago by G. Szabo. Edited 1 time in total.)
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
A significant portion of your report is still missing. In the WIEW option, turn the daily sidebar ON and the calendar OFF.
BDW, you are running CPAP 6 cm with EPR=3, which makes little sense.
10 hours ago
(This post was last modified: 10 hours ago by sowo123. Edited 1 time in total.)
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
It is better, but I still can't see your instrument and AHI details at the top of the left-hand side. You can resize that part so everything shows up.
I suggest titration your parameters to reduce your flow limits.
With the following setting:
Turn CPAP to APAP
Peressure minimum 7 cm
Pressure maximum 14 cm
EPR=3 , full time
Standard more, Ramp off.
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
Here is the Oct 4 and Oct 3 data for my AHI.
8 hours ago
(This post was last modified: 8 hours ago by G. Szabo. Edited 1 time in total.)
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
You are doing ok, but your flow limit on Oct 4 was too high.
It would be best to run the above suggested settings to see the APAP pressure curve.
RE: [OSCAR] Still Tired After 1.5 Years of Usage - Any Help Please?
You are on constant pressure so keep that going.
Your pressure is too too low. A higher EPAP will improve oxygenation and make you feel better during the day.
I would suggest you increase inhalation pressure in 0.5cm increments per week. And report how you feel during the day. Once you get to an inhalation pressure of about 8cm. You can then experiment with reducing EPR to 2 and then to 1 and then eliminate it.
PRS1 Auto & Dreamstation Auto w/ P10 and straight pressure of 8cm