And the other question is a bit weird, but I will ask anyway. I have found since starting CPAP that my, ahem, "old fella" seems to be behaving a lot more like it used to, dramatically so. Is there a reason for this? Anyone understand what's happening there? Maybe my testosterone levels have increased?
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Two Questions - Flow Rate is UARS
|
09-02-2024, 02:44 PM
Two Questions - Flow Rate is UARS
Hi, I read in another thread from some time back that what I am seeing in my flow rate graph is indicative of UARS, can anyone confirm? And if so, is there anything I can do about it? I feel that my nostrils collapse when I sleep to some extent and as a natural nose breather have found that nose pillows really improve my sleep, but I still have this pattern.
And the other question is a bit weird, but I will ask anyway. I have found since starting CPAP that my, ahem, "old fella" seems to be behaving a lot more like it used to, dramatically so. Is there a reason for this? Anyone understand what's happening there? Maybe my testosterone levels have increased?
09-02-2024, 07:24 PM
RE: Two Questions - Flow Rate is UARS
What I see in the snippet posted is a flow limited inspiration. I would have to see far more data to consider UARS as a potential problem.
As far as “little Dodies” newfound energy goes, I have no idea.
09-02-2024, 09:03 PM
RE: Two Questions - Flow Rate is UARS
Hi Dodies, we can't tell much from a 1 minute 42 second zoom of a waveform chart Please post a full screenshot (f12 in daily tab).
RE: Two Questions - Flow Rate is UARS
Ah sorry guys, I thought that you needed to see the shape as I read that the "rounded top" to each breath is indicative UARS, is it not?
How much data is needed? I will post 3 more - but let me know how much is needed.
RE: Two Questions - Flow Rate is UARS
One more from last night.
Yes, aware of the leaking, it normally has not been a problem since very recently, I think I have a leak from my mouth, its like air is being pushed out of my mouth rather than actually exhaling.. Ive woken up from it before, its a weird sensation, but doesn't happen too often. Also, all those CA's present in the first 30 minutes, I was 100% awake for those, I really don't understand why that happens. My SPo2 levels drop a lot when I'm laying in bed to fall asleep, i have the oximiter on and its alarm is constantly going off informing that O2 levels have dipped below 90%. Wish I knew why that happens. But over the entire night I got an average of 94%.
09-16-2024, 11:20 AM
(This post was last modified: 09-16-2024, 11:26 AM by SeePak.
Edit Reason: information addition
)
RE: Two Questions - Flow Rate is UARS
Hi Dodies, welcome
What is your sleep study prescribed pressure? The symptom you describe of air in mouth sound like squirrel cheeks or mouth puffing. I have read on line that this is related to obstructive sleep apnea. The air cant exhaust fast enough nasally. Mouth breathing is a problem, CO2 is exhaled faster than required causing imalances between O2/CO2 leading to inefficient oxygen absorption from blood hemoglobin to tissue cells, so that is not good. When you are first on the CPAP, just laying down to sleep, you can see higher flow rate on your chart. Those larger breaths are reducing CO2 levels, which will cause a pause in breathing, while awake or asleep. Your breathing is probably not ready for sleep !? Try some light breathing exercises, 10 - 15 min before going to bed. Also, without fixing the leaks ( which includes mask AND mouth breathing, so if you think you have no mask leaks, your leaks are ALL mouth breathing. So you will need to keep higher CPAP pressures, which in my experience causes fighting with more mask leaks, and the CO2 exhalation issue above. Getting to NO LEAKS, no mouth breathing (all day!) will allow lower CPAP pressures for a longer period of time during treatment. With CPAP AUTO, that allows a setting range that should satisfy most OA and CA etc. events. The EPR is the tricky one i think, and there is literature on this WIKI site as well, that shows how some people ( myself included) do better WITHOUT EPR . For sure there are tradeoffs depending on your tolerance for pressure during exhale and flow limiting, but if i can do without EPR i dont use it. Oh, and keep forgetting to mention this, especially on some other posts i have commented on... If your sleep study prescription is 7 cm to keep OA events away, make sure your min. pressure is at least 8 to 10 cm, depending on EPR level! If you use 8 cm min. pressure and EPR=3 , you will have a 5 cm min pressure during exhale which is below your sleep study prescription of 7 cm ! I have an idea what i would suggest for you, Let me know if you would like to hear. The others here have far more experience than me. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Respiration rate awake vs sleeping | SingleH | 6 | 105 |
11 minutes ago Last Post: SingleH |
|
[CPAP] Pimp My CPAP! (Please rate my data) | walshy1009 | 3 | 112 |
5 hours ago Last Post: walshy1009 |
|
OSCAR Leak Rate Question | AndyB | 4 | 111 |
8 hours ago Last Post: AndyB |
|
EPR 1, hight flow limit, but lots of CA | throwaway1242 | 10 | 446 |
11 hours ago Last Post: SarcasticDave94 |
|
Help Needed with CPAP Flow Chart Interpretation | HijolG | 15 | 513 |
11-06-2024, 07:30 PM Last Post: HijolG |
|
Can someone explain how EPR reduces flow limitation? | obstructedairway101 | 29 | 1,447 |
11-05-2024, 01:17 PM Last Post: G. Szabo |
|
Flow Limits How to Upgrade CPAP to Bilevel | Deborah K. | 117 | 15,072 |
11-04-2024, 10:22 PM Last Post: Deborah K. |