Need help setting pressure

[jxyzobrien]

just learned how to set pressure on my
resmed autoset h5i s9 series
positive airway pressure device
with humidifier
nasal mask

originally setting it at 12 was like waterboarding, then ROTECH
changed it to 16 doc told em 14. There were no instructions in
tech manual. I found a video on line showing me how to set pressure
and check for leaks and AHI (apneas per hour)

go to utube and see if there is a video or check your manual.

[kwhenrykerr]

Ok I tried to set it and can't get it to do anything. I pushed the round button on the front along with the ramp button for more than 5 seconds and nothing happened.(I tried several times)... Is there something else I'm not doing right?

It took me some playing with the round button after what you have done. It was not very fun. It will keep switching menus when you rotate the knob. Look for the arrows that point up or down and follow them to even more settings. Try not to give up, you will find the pressure settings.

[jen61]

I finally got it to work. (had to unplug, then plug machine back in). I have my settings at minimum 12, maximum 18 with a ramp setting of 9. It shouldn't be a problem because my machine has been starting at 9 for awhile now, and I haven't had to ramp it down to get to sleep. We'll see how it goes!

[kwhenrykerr]

Good Work Jen

[Ghost1958]

Turn knob to highlight setup.
Now push knob and ramp 5 seconds or until it beeps.

Turn knob to highlight setup again and push knob.
Use knob to scroll.thru the menu.
highlight what menu item you want press knob to enter that item.turn knob to change settings.
Press knob to exit that item
When done scroll to exit and push knob,