Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Is Prisma 20A quieter than Airsense 10 autoset
#21
RE: Is Prisma 20A quieter than Airsense 10 autoset
Aktmdn, is the "whoosh" sound coming from the machine or the mask? There is no doubt that air movement and leaks can make sounds, but they don't originate with the machine or motor noises. Masks that vent air directly or leak, are louder than those with a more muffled flow or well-sealed; and the use of EPR or pressure support will increase sound from venting and leaks. My Vauto is kept in a bedside drawer and there is no sound from the machine, but I may hear air noises depending on the condition of my mask seal.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#22
RE: Is Prisma 20A quieter than Airsense 10 autoset
(07-17-2023, 02:43 PM)Sleeprider Wrote: Aktmdn, is the "whoosh" sound coming from the machine or the mask?  There is no doubt that air movement and leaks can make sounds, but they don't originate with the machine or motor noises. Masks that vent air directly or leak, are louder than those with a more muffled flow or well-sealed; and the use of EPR or pressure support will increase sound from venting and leaks.  My Vauto is kept in a bedside drawer and there is no sound from the machine, but I may hear air noises depending on the condition of my mask seal.

The sound comes from left side of the machine, the air intake part. It’s not a mechanical sound but an air gushing kind of sound. 

My machine is kept in the open next to my bed so I notice it. If it will be in a drawer, it will be quite. 

Quick question: If your machine is in a drawer, how do you ensure air good circulation?
Post Reply Post Reply
#23
RE: Is Prisma 20A quieter than Airsense 10 autoset
I used a hole-saw to drill a 2-inch hole through the back of the cabinet to allow the tube and power to be routed to the device and to allow the drawer to be closed, or opened to maintain the machine. Between that hole and the fact the drawer cabinet is anything but air-tight, there is plenty of air supply, and obviously expired air exits the mask vent, so no air is exhaled into the drawer. There is no hazard, and the machine is secure in a better, lower position to facilitate drain-back of any condensate. Quiet, cannot fall on the floor, better appearance for the room. Everything disappears.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#24
RE: Is Prisma 20A quieter than Airsense 10 autoset
(07-17-2023, 11:48 PM)aktmdn Wrote: The sound comes from left side of the machine, the air intake part. It’s not a mechanical sound but an air gushing kind of sound. 

My machine is kept in the open next to my bed so I notice it. If it will be in a drawer, it will be quite. 

Quick question: If your machine is in a drawer, how do you ensure air good circulation?

Thanks for sharing, sounds like a great setup.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Weinmann / Löwenstein Prisma 20A Auto CPAP: APAP settings: standard vs. dynamic Costas P 8 13,459 Yesterday, 02:52 PM
Last Post: segunb
  Airsense 11 Autoset oximetry data not showing up in OSCAR Sleepy Willy 7 270 11-10-2024, 03:10 PM
Last Post: e727147
  should I use cpap pressure over autoset Person 35 1,919 11-05-2024, 12:51 PM
Last Post: Dormeo
Question [CPAP] Löwenstein Prisma Smart Max Jimmykrankie 8 3,008 10-28-2024, 06:14 PM
Last Post: RBos
  [Equipment] Higher AHI Readings on AirSense 11 than AirSense 10 Bmck8381 0 255 10-17-2024, 06:07 PM
Last Post: Bmck8381
  Airsense 10 Autoset Too Much Pressure? MiRock72 14 769 10-16-2024, 08:48 PM
Last Post: MiRock72
  Lowenstein Prisma 20A problem connecting with the humidifier Pushe 1 243 10-08-2024, 08:02 AM
Last Post: WisNaeMe


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.