Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

OSCAR import of Viatom/Wellue data - DST time base
#1
OSCAR import of Viatom/Wellue data - DST time base
Just did my first import of my several months of Wellue SleepU data into OSCAR (what an amazing software product).

One problem: all my oximeter events are an hour ahead of the CPAP data in the OSCAR plots  (so if sleep starts at midnight for the oximeter, it's 1 AM for CPAP), which suggests a disparity in how Daylight Savings Time is being handled in the 2 data streams. 

Any suggestion for how to get the oximeter data to adjust?

Thanks!
Post Reply Post Reply
#2
RE: OSCAR import of Viatom/Wellue data - DST time base
If you are using OSCAR version 1.3.1 only.  Change the SleepU's filename to match the time you want it to start.

Purge the oximeter data.  Go to the directory where the SleepU data is located and change the name of each file to match the CPAP's start time or and hour different.  

Using your midnight and 1 AM as an example:
A SleepU file name is comprised as Year-Month-Day-Hour-minute-second (YYMMDDHHmmss).

Original SleepU filename started at 3/30/2022@00:22:33 = 22030002233

Either the CPAP's time or the real SleepU start time, 3/30/2022@01:22:33 = 220330012233

As shown above you would rename a SleepU file that has a name of, 22030002233 to 220330012233.

You then reimport the SleepU's data into OSCAR, and it will now match.
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: OSCAR import of Viatom/Wellue data - DST time base
I just synchronized the Wellue software (O2 Insight Pro) with my computer clock (under configuration) - will see if that helps.
Post Reply Post Reply
#4
RE: OSCAR import of Viatom/Wellue data - DST time base
That will help going forward, but I was referring to the data you already had downloaded from the SleepU. Also, testing has shown that the SleepU's start time can be up to a minute after you actually started the device. Due to the CPAP's clock time drift, the time synchronization between the SleepU and your CPAP is always a problem.
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#5
RE: OSCAR import of Viatom/Wellue data - DST time base
Excellent, thanks for the helpful guidance. Will also make a mental note to re-sync the SleepU each fall/spring time change.
Post Reply Post Reply
#6
RE: OSCAR import of Viatom/Wellue data - DST time base
Sorry to revive this thread but I'm having the same problem. Oximetry data from my sleep-u is off due to tremendous amounts of time forgetting to change my machine's internal clock for DST. Does this renaming trick work for OSCAR version 1.5? I don't suppose there's a way to automate it? :-/ (also WTF, the things got a cell antenna so the insurance company can spy on you and remotely monitor your compliance but can't automatically set the clock like your phone???)
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Oscar crashes when importing Wellue O2 ring data Armorwolf 2 58 Yesterday, 08:16 PM
Last Post: Armorwolf
  Oscar "No Supported Data Found" Resmed Airsense 11 cpapmj 8 920 11-06-2024, 10:02 PM
Last Post: Rosew
  Data for a specific time frame Person 0 50 11-06-2024, 03:30 PM
Last Post: Person
  Time Change Action ggs5 3 104 11-04-2024, 02:17 PM
Last Post: Crimson Nape
  O2 import DST > ST 1:14am happened twice dgconder 5 114 11-03-2024, 08:55 PM
Last Post: dgconder
  Oscar Crash to desktop on SP02 import WallyPepper 7 559 11-01-2024, 09:36 PM
Last Post: Crimson Nape
  Missing data in OSCAR branmuf 1 106 11-01-2024, 04:20 PM
Last Post: branmuf


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.