S9 setting
The other day I downloaded date to both ResScan and SH. Much to my chargrin there was no detailed data. I did check the "all summary data and ..." selection in resscan. When I went back and was looking at the settings for sleep quality on the machine, I noticed the Sleep Quality setting was now set to Usage. It was set to "on" before the dme tried to check my compliance. Am I correct that the Sleep Quality should be set to "on" for detailed data tracking by the machine? I'm hooked up to the monitoring company by wireless. Can they and why would they change the setting. I mean they can just download compliance usage anyway. Or is this some function of removing the memory card and re-installing it?
I've got to say the ResScan clinical guide is only marginal at best. There's very little discussion of what the various settings mean. I'm pretty well educated but they often leave me scratching my head. I can't image how the typical DME can understand how to setup a machine.
RE: S9 setting
Thanks lonnie. I guess that raises the question -- What does the "sleep quality" setting acually mean to ResMed???
RE: S9 setting
Did they reinsert the same card or a different card? Did they see your machine or just the card?
If you've never used the data software before, it is possible that the settings for the machine are on the card itself. So when they took it out and put it back in, it reset the machine to its 'default' which is whatever they set it to.
But if 'sleep quality' is what tells it to collect data, I don't see why that would be a default.
PaulaO
Take a deep breath and count to zen.
RE: S9 setting
If you you need to have "Sleep Quality" set to ON then can someone tell me why I can see the info in the window of my machine? I can also load it into ResScan ,It set to Usage and I just now changed it to ON just to see what happens. I have in the window AHI,Pressure,Hours,Leaks, ECT I did notice that when I change it to 6 Month or 3 Months I only get 41 days but 1 day, 1 week ,1 Month show all.
RE: S9 setting
This may be a user problem with the ResScan software. I initially downloaded the data from my SD card via the download command from ResScan, and when I asked for a detailed report, all I got was the summary data. I discovered that the default setting for the download function is set to summary. You have to specifically select that you want complete detailed data by clicking on the drop down box in the download dialog, and selecting "detailed". I did this, and the download started again, only this time all of the data was there to see. You can select to have these settings be used in the future.
I'm not sure if this is your problem or not, but it may be worth a look.
