Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

heated hose
#1
Question 
heated hose
I have vpap s with hi5 / heated hose also . I under stand that with the heated hose the temp on the machine is self regulating. But mine stays at 80 degrees, opr where ever I set it. thats ok but I run out of water on nights that is lower humidity. I must have my machine set wrong some where? where should I check & what should it be set at so the heated hose works correctly? Dont-know
Thank You
D
Post Reply Post Reply
#2
RE: heated hose
if temp set at 80F (auto mode) the temp displayed on the screen doesn't change but the climate control adjust humidity level of 80% relative humidity and protect against rainout.

manual mode gives more flexibility but without rainout protection

the higher setting and mouth leak can use more water
Post Reply Post Reply
#3
RE: heated hose
(12-15-2012, 10:53 AM)HILLTOPPER Wrote: I have vpap s with hi5 / heated hose also . I under stand that with the heated hose the temp on the machine is self regulating. But mine stays at 80 degrees, opr where ever I set it. thats ok but I run out of water on nights that is lower humidity. I must have my machine set wrong some where? where should I check & what should it be set at so the heated hose works correctly? Dont-know
Thank You
D

What Zonk said plus, you may need to go to manual mode with a lower humidity setting when the relative humidity is really low in your house.

Your VPAP's higher pressure combined with the larger 22mm ClimateLine hose means you're moving a much larger volume of air AND water molecules through the humidifier than those of us using a regular S9 CPAP with a 15mm ClimateLine hose at a lower pressure, so, you're using more water at the same humidifier setting than a regular S9 CPAP would use even if they're set to an identical temperature and humidity level.

You're going to have to play with the humidity setting to figure-out where it needs to be to last an entire night without running out of water, the hose temperature setting is to keep the hose warm enough so that the cooler ambient air temperature won't cause condensation inside the hose aka rainout.

Ren


Post Reply Post Reply
#4
RE: heated hose
(12-15-2012, 04:21 PM)zonk Wrote: if temp set at 80F (auto mode) the temp displayed on the screen doesn't change but the climate control adjust humidity level of 80% relative humidity and protect against rainout.

manual mode gives more flexibility but without rainout protection

Oh man, thanks for warning me. I requested a ClimateLine hose because of experience with rainout (which took some time to diagnose, all the connections to the machine, the mask, etc until I finally found the problem) so that's very important to me. I haven't received it yet - still awaiting the government funding but it's coming. I'd hate to do something to defeat the purpose.

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  airsense 10/11 aircurve 10 heated tube only eok361 0 87 11-19-2024, 11:30 PM
Last Post: eok361
  Resmed Climateline Vs Oxy Hose Akeyla 8 676 11-15-2024, 07:31 PM
Last Post: StuartC
  Dreamstation heated hose temp repair fix Corvette817 12 4,384 11-12-2024, 01:56 PM
Last Post: Beenie Bay
  Heated tube hevy6 6 505 10-31-2024, 10:53 AM
Last Post: WallyPepper
  [Equipment] Brand new machine prompting to change mask, hose, filter ttsoldier 2 206 10-21-2024, 11:56 AM
Last Post: ttsoldier
  ResMed Airsense 11 heated hose buggy285 6 483 09-28-2024, 08:18 PM
Last Post: Big Guy
  P10 nasal 15mm connected to 19mm hose? Stubert 2 244 09-25-2024, 01:06 PM
Last Post: Stubert


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.